規 格 番 号 |
標 題 |
公 示 |
対 応 国 際 規 格 |
JIS A 5702:2007/AMENDMENT 1:2012 |
硬質塩化ビニル波板(追補1) |
改正 |
|
Rigid PVC corrugated sheets (Amendment 1) |
JIS A 5741:2012 |
木材・プラスチック再生複合材 |
改正 |
|
Wood-plastic recycled composite |
JIS K 6761:2012 |
一般用ポリエチレン管 |
改正 |
・ISO4427-1:2007(MOD) |
Polyethylene pipes for general purposes |
JIS K 6762:2012 |
水道用ポリエチレン二層管 |
改正 |
・ISO4427-1:2007(MOD) |
Double wall polyethylene pipes for water supply |
JIS K 6807:2012 |
木材用ホルムアルデヒド系樹脂接着剤の一般試験方法 |
改正 |
|
General testing methods of formaldehyde resin adhesives for wood |
JIS K 7079-2:2012 |
炭素繊維強化プラスチック―面内せん断試験方法―第2部:ダブルV−ノッチせん断法 |
制定 |
|
Carbon fiber reinforced plastics -- Testing methods for in-plane shear properties -- Part 2: Double V-notch shear method |
JIS K 7080-2:2012 |
炭素繊維強化プラスチック―面圧強さ試験方法―第2部:直交積層板及び擬似等方積層板 |
制定 |
|
Carbon fiber reinforced plastics -- Testing methods for bearing strength -- Part 2: Orthotropic and Quasi-isotropic long fiber laminates |
JIS K 7093:2012 |
炭素繊維強化プラスチックの有孔圧縮強さ試験方法 |
制定 |
|
Test method for open-hole compressive strength of carbon fibre reinforced plastic |
JIS K 7094:2012 |
炭素繊維強化プラスチックの有孔引張強さ試験方法 |
制定 |
|
Test method for open-hole tensile strength of carbon fibre reinforced plastic |
JIS K 7095:2012 |
炭素繊維強化プラスチックの熱分析によるガラス転移温度測定法 |
制定 |
|
Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis |
JIS K 7111-1:2012 |
プラスチック―シャルピー衝撃特性の求め方―第1部:非計装化衝撃試験 |
改正 |
・ISO179-1:2010(MOD) |
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test |
JIS K 7121:1987/AMENDMENT 1:2012 |
プラスチックの転移温度測定方法(追補1) |
改正 |
|
Testing methods for transition temperatures of plastics (Amendment 1) |
JIS K 7122:1987/AMENDMENT 1:2012 |
プラスチックの転移熱測定方法(追補1) |
改正 |
|
Testing methods for heat of transitions of plastics (Amendment 1) |
JIS K 7123:1987/AMENDMENT 1:2012 |
プラスチックの比熱容量測定方法(追補1) |
改正 |
|
Testing methods for specific heat capacity of plastics (Amendment 1) |
JIS K 7196:1991/AMENDMENT 1:2012 |
熱可塑性プラスチックフィルム及びシートの熱機械分析による軟化温度試験方法(追補1) |
改正 |
|
Testing method for softening temperature of thermoplastic film and sheeting by thermomechanical analysis (Amendment 1) |
JIS K 7197:1991/AMENDMENT 1:2012 |
プラスチックの熱機械分析による線膨脹率試験方法(追補1) |
改正 |
|
Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis (Amendment 1) |
JIS K 7315-1:2012 |
プラスチック―ポリフェニレンスルフィド(PPS)成形用及び押出用材料―第1部:呼び方のシステム及び仕様表記の基礎 |
改正 |
・ISO28078-1:2009(IDT) |
Plastics -- Polyphenylene Sulfide (PPS) moulding and extrusion materials -- Part 1: Designation systems and basis for specifications |
JIS K 7315-2:2012 |
プラスチック―ポリフェニレンスルフィド(PPS)成形用及び押出用材料―第2部:試験片の作製方法及び特性の求め方 |
改正 |
・ISO28078-2:2009(IDT) |
Plastics -- Polyphenylene Sulfide (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties |
JIS Z 1710:2012 |
灯油用ポリエチレンかん |
改正 |
|
Blow moulded polyethylene containers for kerosine |